D-Link DSA-3200 Technical Information download pdf (Page 131)

xStack

DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide

117

Link Status Displays whether the IPv6 Interface is Up or Down.

Member Ports

Displays the port numbers that are part of the IPv6 Interface.

NS Retransmit Time (0-

4294967295)

Enter a value between 0 and 4294967295. This is the neighbor solicitation’s retransmit

timer in milliseconds. The default is zero.

Automatic Link Local

Address

Toggle between Enabled and Disabled. Enabling this is helpful when no external source

of network addressing information is available.

After making the desired changes, click the

Apply

button in the top section of the window.

IPv6 Route Settings

A static entry of an IPv6 address can be entered into the Switch’s routing table for IPv6 formatted addresses.

To view the following window, click L3 Features > IPv6 Route Settings:

Figure 4 - 5. IPv6 Route Settings Window

The following parameters can be configured:

Parameter Description

Interface Name

The IP Interface where the static IPv6 route is created.

Nexthop Address

The corresponding IPv6 address for the next hop Gateway address in IPv6 format.

Metric (1-65535)

The metric of the IPv6 interface entered into the table representing the number of routers

between the Switch and the IPv6 address above. Metric values allowed are between 1 and

65535.

Click Apply to implement the changes made. Click Delete All to remove all the entries.

IPv6 Neighbor Settings

The user can configure the Switch’s IPv6 neighbor settings. The Switch’s current IPv6 neighbor settings will be displayed in the

table at the bottom of this window.

To view the following window, click L3 Features > IPv6 Neighbor Settings:

Figure 4 - 6. IPv6 Neighbor Settings Window

1 2 ... 126 127 128 129 130 131 132 133 134 135 136 ... 320 321

No comments

D-Link DSA-3200 Technical Information Page 131