D-Link DES-3226L Technical Information download pdf (Page 102)

102 D-Link DES-3226L Command Line Reference

Hypertext Transfer Protocol (HTTP) Commands

This section describes the commands you use to configure Web-based access to the device.

ip http secure-port

This command is used to set the sslt port where port can be 1-65535 and the default is port 443.

Default 443

Format ip http secure-port <portid>

Mode Privileged EXEC

no ip http secure-port

This command is used to reset the sslt port to the default value.

Format no ip http secure-port

Mode Privileged EXEC

ip http secure-protocol

This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or

to both TLS1 and SSL3.

Default SSL3 and TLS1

Format ip http secure-protocol [SSL3] [TLS1]

Mode Privileged EXEC

ip http secure-server

This command is used to enable the secure socket layer for secure HTTP.

Default disabled

Format ip http secure-server

Mode Privileged EXEC

no ip http secure-server

This command is used to disable the secure socket layer for secure HTTP.

Format no ip http secure-server

Mode Privileged EXEC

ip http server

This command enables access to the switch through the Web interface. When access is enabled, the user

can login to the switch from the Web interface. When access is disabled, the user cannot login to the

Web server on the switch.

Disabling the Web interface takes effect on all interfaces immediately.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 127 128

No comments

D-Link DES-3226L Technical Information Page 102