D-Link DES-3226L Technical Information download pdf (Page 67)

Switching Commands 67

802.1d IEEE 802.1D-compliant STP mode is used

fast Fast STP mode is used

off STP is turned off

Default disabled

Format

spanning-tree {<logical slot/port> | all | {off | 802.1d | fast}}

Mode Global Config

no spanning-tree

This command sets the spanning-tree operational mode to disabled. While disabled, the spanning-tree

configuration is retained and can be changed, but is not activated.

Format no spanning-tree

Mode Global Config

spanning-tree bpdumigrationcheck

This command enables BPDU migration check on a given interface. The all option enables BPDU

migration check on all interfaces.

Format spanning-tree bpdumigrationcheck {<slot/port> | all}

Mode Global Config

spanning-tree configuration name

This command sets the Configuration Identifier Name for use in identifying the configuration that this

switch is currently using. The <name> is a string of up to 32 characters.

Default The base MAC address displayed using hexadecimal notation.

Format spanning-tree configuration name <name>

Mode Global Config

no spanning-tree configuration name

This command resets the Configuration Identifier Name to its default.

Format no spanning-tree configuration name

Mode Global Config

spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level is a number in the range of 0 to 65535

and is used to identify the configuration that this switch is currently using.

Default 0

Format spanning-tree configuration revision <0-65535>

Mode Global Config

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 127 128

No comments

D-Link DES-3226L Technical Information Page 67