30 D-Link DES-3226L Command Line Reference
network mgmt_vlan
This command configures the Management VLAN ID.
Default 1
Format network mgmt_vlan <1-4069>
Mode Privileged EXEC
no network mgmt_vlan
This command sets the Management VLAN ID to the default.
Format no network mgmt_vlan <1-4069>
Mode Privileged EXEC
transport input telnet
This command regulates new telnet sessions. If sessions are enabled, new telnet sessions can be
established until there are no more sessions available. If sessions are disabled, no new telnet sessions
are established. An established session remains active until the session is ended or an abnormal network
error ends the session.
Default enabled
Format transport input telnet
Mode Line Config
no transport input telnet
This command disables telnet sessions. If sessions are disabled, no new telnet sessions are established.
Format no transport input telnet
Mode Line Config
telnetcon maxsessions
This command specifies the maximum number of telnet connection sessions that can be established. A
value of 0 indicates that no telnet connection can be established. The range is 0 to 5.
Default 5
Format telnetcon maxsessions <0-5>
Mode Privileged EXEC
no telnetcon maxsessions
This command sets the maximum number of telnet connection sessions that can be established to the
default value.
Format no telnetcon maxsessions
Mode Privileged EXEC
Comments to this Manuals