D-Link DES-3226L Technical Information download pdf (Page 68)

68 D-Link DES-3226L Command Line Reference

no spanning-tree configuration revision

This command sets the Configuration Identifier Revision Level the default value of 0.

Format no spanning-tree configuration revision

Mode Global Config

spanning-tree edgeport

This command specifies that this port is an Edge Port within the common and internal spanning tree.

This allows this port to transition to Forwarding State without delay.

Format spanning-tree edgeport

Mode Interface Config

no spanning-tree edgeport

This command specifies that this port is not an Edge Port within the common and internal spanning tree.

Format no spanning-tree edgeport

Mode Interface Config

spanning-tree forceversion

This command sets the Force Protocol Version parameter to a new value. The Force Protocol Version

can be one of the following:

802.1d - ST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1d functionality supported)

802.1w - RST BPDUs are transmitted rather than MST BPDUs (IEEE 802.1w functionality supported

)

z 802.1s - MST BPDUs are transmitted (IEEE 802.1s functionality supported)

Default 802.1s

Format spanning-tree forceversion <802.1d | 802.1w | 802.1s>

Mode Global Config

no spanning-tree forceversion

This command sets the Force Protocol Version parameter to the default value, i.e. 802.1s.

Format no spanning-tree forceversion

Mode Global Config

spanning-tree forward-time

This command sets the Bridge Forward Delay parameter to a new value for the common and internal

spanning tree. The forward-time value is in seconds within a range of 4 to 30, with the value being

greater than or equal to “(Bridge Max Age / 2) + 1”.

Default 15

Format spanning-tree forward-time <4-30>

Mode Global Config

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 127 128

No comments

D-Link DES-3226L Technical Information Page 68