D-Link DVG-3016S User Manual download pdf (Page 10)

3. Setting the Gateway through IVR

VoIP transmits voice data (packet) via the Internet to achieve telecommunications. This means

that the telecommunication quality is closely related to the whole network environment. If any

one of the telecommunicating parties has insufficient bandwidth or frequent packet loss, the

telecommunication quality will be poor. Therefore, an excellent telecommunication can only be

created when Gateway is connected to the Internet and when network environment is stable.

Preparation

 Install the Gateway according to instructions. Connect the power supply, telephone set,

telephone cable, and network cable properly as described in Chapter 2.

 If a static IP is used, confirm the desired IP settings of the WAN Port (IP address, Subnet

Mask, and Default gateway). Please contact your local Internet Service Provider (ISP) if

you have any questions.

 If using dialup ADSL (PPPoE) for network connection, confirm the dialup account

number and password.

 If users wish to build Gateway under the NAT, Gateway WAN Port IP address and LAN

Port should not use the same range. This is to avoid phone failures.

Basic Settings of a Gateway

 IP Settings— Connecting Gateway to the Internet.

Gateway provides two setting modes:

1. Telephone IVR Setting Mode

2. Browser Setting Mode

The IVR provides basic query and setting functions, while the browser provides a full setting

function.

IVR (Interactive Voice Response)

Gateway provides convenient IVR functions. Users only need to pick up a handset and enter the

function code for the query and setting without using a PC.

NOTE: After finishing the settings, make sure the new settings are saved. This is so that

the new settings will take effect after the system is restarted.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 51 52

No comments

D-Link DVG-3016S User Manual Page 10