D-Link DVG-3016S User Manual download pdf (Page 23)

Network Settings (LAN)

 Network Settings (LAN): Gateway LAN Port IP address and the subnet mask value.

Please note that Gateway is built under NAT: Gateway LAN Port IP address cannot be

in the same section as the NAT LAN Port IP address, or else it is unable to make or

receive calls. For example, if the NAT LAN Port IP address is 192.168.8.1, then

Gateway LAN Port cannot be ranged between 192.168.8.1 ~ 192.168.8.254. If so,

please change the LAN port IP address, (e.g. setting the IP address to 192.168.99.254.)

 Port of Web Access from WAN: Http port for WAN. To make this setting, the LAN Port

must be used. Settings cannot be made using the WAN Port. Always use port 80 when

connecting to LAN port.

QoS Settings

 QoS (Quality of Service): Sets an external bandwidth to ensure sound quality during

transmission (When this function is enabled, the voice packet has the highest priority to

ensure telecommunication quality while less bandwidth is assigned for data

transmission).

 ToS/DiffServ (Type of Service/DSCP): The voice packet has the highest priority to

ensure telecommunication quality; the larger the value you set, the higher priority you

will get.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

No comments

D-Link DVG-3016S User Manual Page 23