D-Link DSL 2750U User Manual download pdf (Page 115)

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

USB Modem

This menu is designed to operate USB modems.

If the PIN code check for the SIM card inserted into your USB modem is not disabled, then upon

the first access to the pages of the USB modem menu (under the current web-interface session)

the page for checking the PIN code is displayed

. Enter the PIN code in the relevant field and click

the Enter button.

Information

On the USB modem / Information page, you can view data on the USB modem connected to the

router.

Figure 102. The USB modem / Information page.

When a USB modem is connected to the router, the following data are displayed on the page:

Parameter Description

Vendor

The manufacturer of your USB modem.

Model The alphanumeric code of the model of your USB modem.

Revision

The revision of the firmware of your USB modem.

IMSI The code stored in the SIM card inserted to your USB modem.

IMEI

The code stored in the memory of the USB modem.

Signal level

The signal level at the input of the modem's receiver. The zero signal

level shows that you are out of the coverage area of the selected

operator's network.

Operator name

When the needed network is available, the name of the operator is

displayed in this field.

Mode

A type of the network to which the USB modem is connected (2G or 3G).

8 For GSM USB modems only. For CDMA USB modems, it is required to disable the PIN code check on the

identification card prior to connecting the USB modem to the router.

Page 115 of 138

1 2 ... 110 111 112 113 114 115 116 117 118 119 120 ... 137 138

No comments

D-Link DSL 2750U User Manual Page 115