D-Link DSL 2750U User Manual download pdf (Page 71)

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

Parameter Description

Dial on demand

Select the checkbox if you want the router to establish connection to

the Internet on demand. In the Maximum idle time field, specify a

period of inactivity (in seconds) after which the connection should

be terminated.

PPP IP extension

This option is used by some ISPs. Contact your ISP to clarify if this

checkbox needs to be enabled.

Use Static IP Address

Select the checkbox if you want to use a static IP address to access

the Internet. In the Static IP Address field displayed when the

checkbox is selected, specify a static IP address.

PPP debug

Select the checkbox if you want to log all data on PPP connection

debugging.

PPPoE pass through

Select the checkbox if you want to allow PPPoE clients of

computers from your LAN to connect to the Internet through this

PPPoE connection of the router.

The IP section is displayed for the Static IP and Dynamic IP connection types.

Figure 64. The page for creating a new connection. The IP section.

Parameter Description

IP Address

Displayed for the Static IP type only.

Enter an IP address for this WAN connection.

Netmask

Displayed for the Static IP type only.

Enter a subnet mask for this WAN connection.

Gateway IP Address

Displayed for the Static IP type only.

Enter an IP address of the gateway used by this WAN connection.

Vendor ID

Displayed for the Dynamic IP type only.

The identifier of your ISP. Optional.

When all needed settings are configured, click the Save button.

Page 71 of 138

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 137 138

No comments

D-Link DSL 2750U User Manual Page 71