D-Link DSL 2750U User Manual download pdf (Page 99)

DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi

and Built-in Switch

User Manual

Configuring via Web-based Interface

Routing

On the Advanced / Routing page, you can add static routes (routes for networks that are not

connected directly to the device but are available through the interfaces of the device) into the

system.

Figure 86. The Advanced / Routing page.

To create a new route, click the Add button.

Figure 87. The page for adding a static route.

You can specify the following parameters:

Parameter Description

Destination network

A destination network to which this route is assigned.

Destination netmask The destination network mask.

Gateway

An IP address through which the destination network can be

accessed. The field is displayed when the <Auto> value is selected

from the Via Interface drop-down list.

Metric

A metric for the route. The lower the value, the higher is the route

priority. Optional.

Via Interface

Select an interface (connection) through which the destination

network can be accessed from the drop-down list. If you have

selected the <Auto> value of this drop-down list, the router itself

sets the interface on the basis of data on connected networks.

Click the Save button.

Page 99 of 138

1 2 ... 94 95 96 97 98 99 100 101 102 103 104 ... 137 138

No comments

D-Link DSL 2750U User Manual Page 99