D-Link DVG-3016S User Manual download pdf (Page 14)

DVG-3016S/3032S User’s Manual Network Settings

D-Link Systems, Inc. 11

y Enable DHCP Server: Enable or Disable DHCP server service of the gateway.

y IP Pool Starting Address: The first IP address to be assigned to DHCP clients.

y IP Pool Ending Address: The last IP address to be assigned to DHCP clients.

y IP Pool Uses Other Default Gw: Tick the check box to give DHCP client the other default gateway.

y IP Pool Default Gateway: Assign the default gateway and subnet mask to DHCP client.

y IP Pool Subnet mask: Assign the default gateway and subnet mask to DHCP client.

y Lease Time: The valid period of an assigned IP address.

y Domain Name Server Assignment: The DNS information to be assigned to DHCP clients.

Auto: the gateway learns primary and secondary addresses from the ISP’s DHCP server or PPPoE

server.

Manual: enter the primary and secondary addresses manually. Please be sure that the IP addresses

are correct otherwise the gateway will not be able to access hosts using hostnames instead of IPs.

y Port of Web Access from WAN: HTTP port for WAN. To change this setting, web configuration must

be accessed via the gateway’s LAN port. The gateway always uses port 80 for HTTP connection via

the LAN port.

NOTE: Due to network security concerns, Web Access for WAN port is disabled by default (port

number “0” in this option means disable web access). To enable it, simply enter a valid port number in this

field.

y Enable Web UI: When “Enable Web UI” is un-ticked, you cannot access from Web.

y Enable Telnet Service: It is to activate Telnet access from WAN or LAN when ticked. You can

configure all settings on web user interface through telnet, such as IP configuration, SIP settings,

Provision settings, reset to a default stat, etc.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 70 71

No comments

D-Link DVG-3016S User Manual Page 14