D-Link DVG-3016S User Manual download pdf (Page 23)

DVG-3016S/3032S User’s Manual Telephony Settings

D-Link Systems, Inc. 20

y FAX/Modem: Enable this line to detect if there is a fax tone and transfer the call to a fax line.

Function Fax Detection Content of SDP of re-INVITE Receive re-INVITE with T.38

Disable No N/A Accept and change RTP to T.38

T.38 Fax Yes re-INVITE with T.38 and T.30 Accept and change RTP to T.38

T.30 Fax Yes re-INVITE with T.30 Accept and change RTP to T.38

T.30

Fax/Modem

Detect CED

only

re-INVITE with T.30 Accept and change RTP to T.38

T.30 Only No

N/A(All the calls use T.30

codec of RTP stream, not

need to change codec.)

Accept and change RTP to T.38

T.38 Native Yes re-INVITE with T.38 Accept and change RTP to T.38

NOTE: When a fax tone is detected from the call, the gateway will automatically switch from voice

mode to fax mode. Hence, the fax settings will be temporarily applied to a specific port which

detects the fax tones, instead of its default voice settings.

y Trunk Hunting Order: To set FXO dial-out mode when there is an incoming call dialed FXO

representative number.

First Idle: The gateway will assign each unassigned call from first FXO line.

Sequential: The gateway will automatically assign the first unassigned call to the first FXO line. The

second FXO line will dial the second unassigned call out. Each line will be used.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 70 71

No comments

D-Link DVG-3016S User Manual Page 23