D-Link DVG-3016S User Manual download pdf (Page 5)

DVG-3016S/3032S 16/32-port VoIP Gateway User’s Manual Hardware Description

D-Link Systems, Inc. 2

1-2 Hardware Description

Front Panel

y Power Indicator: Green light indicates a normal power supply.

y Run Indicator: Blinking green light indicates normal operation.

y Alarm Indicator: When the system starts up, the red light will blink. It also indicates abnormal gateway

behavior.

y 1 – 32 stands for Port1 – Port32 (Line1 – Line32).

y WAN stands for the WAN Port Indicator.

y LAN stands for the LAN Port Indicator.

9 When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40

seconds, the Alarm indicator will go off, the Run indicator will blink in green, and the Power

indicator will stay green under normal operational conditions. If the Alarm indicator continues to

blink, it means the system is currently communicating with ISP and has yet to obtain an IP address.

9 When the WAN is connected, the WAN indicator will light up in green and if data is being transmitted

over the Internet, the indicator blinks in green and orange.

Rear Panel

WARNING: DO NOT (1) connect the phone ports to each other (FXS to FXS) or (2) connect any

phone port directly to a PSTN line (FXS to PSTN) or to an internal PBX line (FXS to PBX extension).

Doing so may damage your VoIP gateway

Restore to factory default: (IP address, User’s. Name and Password)

(1) Pull off the power plug.

(2) Press reset bottom (do not let go of the reset button)

(3) Plug the plug back into the socket (do not let go of the reset button).

(4) Let go of the reset button after 6 seconds. Factory settings will be restored.

1 2 3 4 5 6 7 8 9 10 ... 70 71

No comments

D-Link DVG-3016S User Manual Page 5