D-Link DVG-3016S User Manual download pdf (Page 43)

DVG-3016S/3032S User’s Manual Transit Call Control

D-Link Systems, Inc. 40

3-15 Transit Call Control

If you wish to restrict a general user (one who is not required to enter the PIN code) to local calls only and

prohibit him/her from making long-distance calls started with a prefix “0”, do the following steps:

1. Enable the Outbound Call Control function,

2. Set the PIN code for Outbound Level 5 to blank,

3. Set the Long-Distance Control Table to correspond with the Outbound Level 5 to prohibit making any

call with the prefix “0” (as shown above).

Note: Transit Call Control is effective when it cooperate with Long-Distance Control Table.

y Inbound Call Control: To determine when users make a phone call from a PSTN to Gateway FXO

whether or not they check the inbound PIN code while using a VoIP －only effective for incoming calls

calling from a PSTN trunk.

y Outbound Call Control: To determine when users utilize Gateway FXO interface to divert to a PSTN

whether or not they check the outbound PIN code － only effective for outgoing calls being diverted to

a PSTN Trunk.

y PIN Code: Enter the PIN code (4-6 digits or leave blank. A blank indicates no PIN code is required at

this level. Generally, the PIN at level 5 can remain blank to simplify the phone number.)

y Enable: Enables the PIN code at each level.

y Privileges: The level is divided into 0~5 (The levels are in descending order; 0 stands for the highest

authority and 5 stands for the lowest.)

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 70 71

No comments

D-Link DVG-3016S User Manual Page 43