D-Link DGS-3700 User Manual download pdf (Page 199)

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

188

From

Use the drop-down menu to select from MAC Address, IPv4 Address or IPv6.

Use the drop-down menu to select from MAC Address, IPv4 Address or IPv6. When IPv6 is

selected the user can only enter the IPv6 source address or the IPv6 destination address at

any one time.

Action

Select Permit to specify that the packets that match the access profile are forwarded by the

Switch, according to any additional rule added (see below).

Select Deny to specify the packets that match the access profile to be filtered.

Select Mirror to specify that packets that match the access profile are mirrored to a port

defined in the config mirror port command. Port Mirroring must be enabled and a target port

must be set.

Option Use the pull down menu to select an option, the user can choose between Rate Limiting,

Change 1P Priority, Replace DSCP and Replace ToS Precedence.

Apply To Use the pull down menu to select an option, the user can choose between Ports, VLAN

Name or VLAN ID and enter the appropriate information.

Click Apply to implement changes made.

Access Profile List

Creating an access profile is divided into two basic parts. The first is to specify which part or parts of a frame the

Switch will examine, such as the MAC source address or the IP destination address. The second part is entering the

criteria the Switch will use to determine what to do with the frame. The entire process is described below in two parts.

To view this window, click ACL > Access Profile List as shown below:

Figure 6 - 2 Access Profile Lists

To add an ACL Profile, click the Add ACL Profile button, which, will display the window below. There are four Access

Profile Configuration pages; one for Ethernet (or MAC address-based) profile configuration, one for IPv4 address-

based profile configuration, one for the Packet Content and one for IPv6. You can explore the four Access Profile

Configuration options by entering a Profile ID and Profile Name and using the radio button to select an ACL Type

and click Select. The user may remove all Access Profiles by clicking the Delete All button (This button will not clear

Address Binding ACL entries, which can only be deleted through the IP-MAC Binding window). The page shown

below is the Ethernet Access Profile Configuration page.

1 2 ... 194 195 196 197 198 199 200 201 202 203 204 ... 291 292

No comments

D-Link DGS-3700 User Manual Page 199