D-Link DGS-3700 User Manual download pdf (Page 62)

DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual

Single IP Management

Simply put, D-Link Single IP Management is a concept that will stack switches together over Ethernet instead of using

stacking ports or modules. There are some advantages in implementing the "Single IP Management" feature:

1. SIM can simplify management of small workgroups or wiring closets while scaling the network to handle

increased bandwidth demand.

2. SIM can reduce the number of IP address needed in your network.

3. SIM can eliminate any specialized cables for stacking connectivity and remove the distance barriers that

typically limit your topology options when using other stacking technology.

Switches using D-Link Single IP Management (labeled here as SIM) must conform to the following rules:

SIM is an optional feature on the Switch and can easily be enabled or disabled through the Command Line Interface

or Web Interface. SIM grouping has no effect on the normal operation of the Switch in the user's network.

There are three classifications for SIM. The Commander Switch (CS), which is the master switch of the group,

Member Switch (MS), which is a switch that is recognized by the CS a member of a SIM group, and a Candidate

Switch (CaS), which is a Switch that has a physical link to the SIM group but has not been recognized by the CS as a

member of the SIM group.

A SIM group can only have one Commander Switch (CS).

All switches in a particular SIM group must be in the same IP subnet (broadcast domain). Members of a SIM group

cannot cross a router.

A SIM group accepts up to 33 switches (numbered 0-32), including the Commander Switch (numbered 0).

There is no limit to the number of SIM groups in the same IP subnet (broadcast domain), however a single switch can

only belong to one group.

If multiple VLANs are configured, the SIM group will only utilize the system VLAN on any switch.

SIM allows intermediate devices that do not support SIM. This enables the user to manage switches that are more

than one hop away from the CS.

The SIM group is a group of switches that are managed as a single entity. SIM switches may take on three different

roles:

1. Commander Switch (CS) – This is a switch that has been manually configured as the controlling device for a

group, and takes on the following characteristics:

It has an IP Address.

It is not a commander switch or member switch of another Single IP group.

It is connected to the member switches through its management VLAN.

2. Member Switch (MS) – This is a switch that has joined a single IP group and is accessible from the CS, and it

takes on the following characteristics:

It is not a CS or MS of another Single IP group.

It is connected to the CS through the CS management VLAN.

3. Candidate Switch (CaS) – This is a switch that is ready to join a SIM group but is not yet a member of the

SIM group. The Candidate Switch may join the SIM group of a switch by manually configuring it to be a MS of

a SIM group. A switch configured as a CaS is not a member of a SIM group and will take on the following

characteristics:

It is not a CS or MS of another Single IP group.

It is connected to the CS through the CS management VLAN

After configuring one switch to operate as the CS of a SIM group, additional switches may join the group through a

direct connection to the Commander switch. Only the Commander switch will allow entry to the candidate switch

enabled for SIM. The CS will then serve as the in band entry point for access to the MS. The CS's IP address will

become the path to all MS's of the group and the CS's Administrator's password, and/or authentication will control

access to all MS's of the SIM group.

With SIM enabled, the applications in the CS will redirect the packet instead of executing the packets. The

applications will decode the packet from the administrator, modify some data, then send it to the MS. After execution,

the CS may receive a response packet from the MS, which it will encode and send it back to the administrator.

When a CS becomes a MS, it automatically becomes a member of the first SNMP community (include read/write and

read only) to which the CS belongs. However, if a MS has its own IP address, it can belong to SNMP communities to

which other switches in the group, including the CS, do not belong.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 291 292

D-Link DGS-3700 User Manual Page 62

Comments to this Manuals

D-Link DGS-3700 User Manual Page 62

Comments to this Manuals

Related products and manuals for Network switches D-Link DGS-3700