D-Link DGS-3700 User Manual Page 41

  • Download
  • Add to my manuals
  • Print
  • Page
    / 292
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 40
DGS-3700-12/DGS-3700-12G Series Layer 2 Gigabit Ethernet Switch User Manual
30
When DHCP autoconfiguration is Enabled, the Switch becomes a DHCP client automatically after rebooting. The
DHCP server must have the TFTP server IP address and configuration file name, and be configured to deliver this
information in the data field of the DHCP reply packet. The TFTP server must be running and have the requested
configuration file in its base directory when the request is received from the Switch. Consult the DHCP server and
TFTP server software instructions for information on loading a configuration file.
If the Switch is unable to complete the autoconfiguration process the previously saved local configuration file present
in Switch memory will be loaded.
MAC Address Aging Time
This table specifies the length of time a learned MAC Address will remain in the forwarding table without being
accessed (that is, how long a learned MAC Address is allowed to remain idle). To change this, enter a value
representing the MAC address age-out time in seconds. The MAC Address Aging Time can be set to any value
between 10 and 1,000,000 seconds. The default setting is 300 seconds.
To view this window, click Configuration > MAC Address Aging Time as shown below:
Figure 2 - 31 MAC Address Aging Time window
Web Settings
Web-based management is Enabled by default. If you choose to disable this by selecting Disabled, you will lose the
ability to configure the system through the web interface as soon as these settings are applied.
To view this window, click Configuration > Web Settings as shown below:
Figure 2 - 32 Web Settings window
Telnet Settings
Telnet configuration is Enabled by default. If you do not want to allow configuration of the system through Telnet
choose Disabled. The TCP ports are numbered between 1 and 65535. The "well-known" TCP port for the Telnet
protocol is 23.
To view this window, click Configuration > Telnet Settings as shown below:
Figure 2 - 33 Telnet Settings window
Page view 40
1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 291 292

Comments to this Manuals

No comments