D-Link DVG-3016S User Manual download pdf (Page 11)

DVG-3016S/3032S User’s Manual Network Settings

D-Link Systems, Inc. 8

(DNS) Settings

Domain Name Server (DNS): While a gateway is accessing another gateway or a computer with a

hostname, it will look up the IP address from the DNS provided by your ISP. Normally, the ISP assigns DNS

information while negotiating with PPPoE or DHCP. If the DNS is not assigned automatically or the WAN

port is assigned a static IP address, the DNS settings must be assigned manually.

Auto: the gateway learns primary and secondary addresses from the ISP’s DHCP server or PPPoE server.

Manual: enter the primary and secondary addresses manually. Please be sure that the IP addresses are

correct otherwise the gateway will not be able to access hosts using hostnames instead of IPs.

WAN Link Speed

It is used to choose the WAN Ethernet link speed. The default is “Auto”. Please choose the same speed with

Router/Switch/Hub when the VoIP gateway connected to Router/Switch/Hub has the link problem.

Clone MAC

Some Internet Service Providers (ISPs) assign bandwidth via MAC (Media Access Control) addresses. You

can click the "Clone" button to type in a MAC address which will be recognized by your ISP. It is only

necessary to fill in the field if it is required by your ISP.

The “Your MAC Address” field will be blank as you log-in via the WAN port.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 70 71

No comments

D-Link DVG-3016S User Manual Page 11